Home - Return to Previous Page
Ididit Retrofit 1953-56 GM Style Ford Half-Ton Truck Tilt Column Shift Steering Column
1130800010/20/51 (II) DS
** Images above are for finish reference, actual product may vary slightly**
This retrofit column is designed to fit your Ford Truck and does NOT require modification to your original vehicle to install. This GM Style column features a GM top shaft and a 3 7/8" Wiring Plug. Use an ididit installation kit to install your new steering column in place of the old. Using an adaptor, add an aftermarket steering wheel and the gripping surface of the new wheel will be in the same location as the original. The shift pattern on these columns allow you to use either a 3 or 4-speed automatic transmission. A gear shift indicator is an option, but not included. A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column.
This retrofit column is designed to fit your Ford Truck and does NOT require modification to your original vehicle to install. This GM Style column features a GM top shaft and a 3 7/8" Wiring Plug. Use an ididit installation kit to install your new steering column in place of the old. Using an adaptor, add an aftermarket steering wheel and the gripping surface of the new wheel will be in the same location as the original. The shift pattern on these columns allow you to use either a 3 or 4-speed automatic transmission. A gear shift indicator is an option, but not included. A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column.
Pricing:
$730.00
Description
Lower Shaft: 1" DD
Straight or Tilt: 8-Position Tilt
Neutral Safety Switch: No
4-Way Flashers: Yes
Self-Canceling Turn Signals: Yes
Upper Tube Diameter (in): 2.25 in
Upper Shaft: 69 to '94 GM Passenger Car
Shifter Location: Column Shift
Telescoping Head: No
Wire Plug: GM 3 7/8"
Horn: Yes
Gear Shift Indicator Included: No
Floor Mount Included: No
Knobs & Levers Included: Yes
Under Dash Mount Included: No
Collapsible: No
Lower Tube Diameter (in): 2.25 in
Transmission: Auto
Straight or Tilt: 8-Position Tilt
Neutral Safety Switch: No
4-Way Flashers: Yes
Self-Canceling Turn Signals: Yes
Upper Tube Diameter (in): 2.25 in
Upper Shaft: 69 to '94 GM Passenger Car
Shifter Location: Column Shift
Telescoping Head: No
Wire Plug: GM 3 7/8"
Horn: Yes
Gear Shift Indicator Included: No
Floor Mount Included: No
Knobs & Levers Included: Yes
Under Dash Mount Included: No
Collapsible: No
Lower Tube Diameter (in): 2.25 in
Transmission: Auto
Installation Kits
Installation Kits
INSTALLATION KITS (all the required components needed for flawless installation)
1953-56 Ford Half-Ton Truck
This column comes complete with a turn signal plug and horn relay which will convert the ididit wiring to your Ford wiring. To install, a swinger-style column drop will be required to secure the column to the dash, as well as a floor mount and u-joint. Modification of the intermediate shaft is also required if you are using the original gearbox.
1965-79 Ford Half-Ton Truck
A new rag joint is required to install. This column comes complete with a pre-welded underdash mount that will match the original bolt pattern. A Female End Plug which connects with the ididit wiring plug is also included. The wires will simply be matched by function rather than color.
For 1965-66 columns: Please note that the Bendix box was frequently used as a replacement for the Saginaw box. If not using the original steering box, a shorter length column may be required. Call ididit for details.
INSTALLATION KITS (all the required components needed for flawless installation)
1953-56 Ford Half-Ton Truck
This column comes complete with a turn signal plug and horn relay which will convert the ididit wiring to your Ford wiring. To install, a swinger-style column drop will be required to secure the column to the dash, as well as a floor mount and u-joint. Modification of the intermediate shaft is also required if you are using the original gearbox.
1965-79 Ford Half-Ton Truck
A new rag joint is required to install. This column comes complete with a pre-welded underdash mount that will match the original bolt pattern. A Female End Plug which connects with the ididit wiring plug is also included. The wires will simply be matched by function rather than color.
For 1965-66 columns: Please note that the Bendix box was frequently used as a replacement for the Saginaw box. If not using the original steering box, a shorter length column may be required. Call ididit for details.
Details
- 1130800010/20/51 (II) DS
- 1130800010/20/51 (II) DS
- Ididit
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping (Lower 48)
Customer Reviews
Total Reviews (0)
You must login to post a review.
- Big Dog Auto Difference
- Huge SelectionWe carry 1000's of products for your classic car or truck!
- Old Fashioned Customer ServiceOur Customers are our #1 priority. We are committed to your satisfaction!
- We Are Classic Car Enthusiasts We have a deep love of the classics and over 40 years of experience!
- Super Low Prices & Free ShippingWe offer the lowest prices on the Web and we offer free shipping on orders over $75!
- Have a question? Ask the Pros
- Email UsGot a question? We've got the answer!
- Call Us800-686-1464
- ChatChat with Us
Write the First Review!