Home - Return to Previous Page

Ididit Retrofit 1967-72 GM Style Ford Half-Ton Truck Tilt Column Shift Steering Column for Manual Box

Additional Images
1130730010/20/51 (II) DS
** Images above are for finish reference, actual product may vary slightly**

This retrofit column is designed to fit your Ford Truck and does NOT require modification to your original vehicle to install. This GM Style column features a GM top shaft and a 3 7/8" Wiring Plug. Pre-welded underdash mounts are included with all 1967-72 columns and are designed to fit your application. Use an ididit installation kit to install your new steering column in place of the old. Using an adaptor, add an aftermarket steering wheel and the gripping surface of the new wheel will be in the same location as the original. The shift pattern on these columns allow you to use either a 3 or 4-speed automatic transmission. The 1967-72 column shift column comes complete with a neutral safety switchA gear shift indicator is an option, but not included. A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column.
Please Call for Availability
800-686-1464

Description

Neutral Safety Switch: Yes
4-Way Flashers: Yes
Self-Canceling Turn Signals: Yes
Lower Shaft: 3/4" 36
Straight or Tilt: 8-Position Tilt
Horn: Yes
Gear Shift Indicator Included: No
Floor Mount Included: No
Knobs & Levers Included: Yes
Under Dash Mount Included: Yes
Collapsible: No
Lower Tube Diameter (in): 2.25 in
Upper Tube Diameter (in): 2.25 in
Upper Shaft: 69 to '94 GM Passenger Car
Shifter Location: Column Shift
Telescoping Head: No
Wire Plug: GM 3 7/8"
Transmission: Auto

Special Notes: Because the GM Style column uses the standard GM wiring harness, dimmer/wiper and cruise control options CAN be added to the column.

Please Note: A stock Ford steering wheel WILL NOT bolt to the ididit GM Style Ford column.