Ididit Retrofit 1965-66 Impala Tilt Column Shift Steering Column
This retrofit column is designed to fit your 1965-66 Impala and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount. Using an ididit installation kit, install your new steering column in place of the old. These columns will match the dash perfectly using the original bezel. Comes complete with a neutral safety switch (shift indicator not included). The shift pattern on the column allows you to use either a 3 or 4-speed automatic transmission (except early Powerglides, as they have a reverse pattern transmission). A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column. Using an adaptor, add an aftermarket wheel or original wheel but keep in mind that an aftermarket wheel may push the wheel closer to the driver and the original wheel will increase the overall length of the column towards the driver.
Description
4-Way Flashers: Yes
Straight or Tilt: 8-Position Tilt
Lower Shaft: 3/4" 36
Neutral Safety Switch: Yes
Self-Canceling Turn Signals: Yes
Collapsible: No
Telescoping Head: No
Floor Mount Included: No
Gear Shift Indicator Included: No
Under Dash Mount Included: No
Horn: Yes
Upper Shaft: 69 to '94 GM Passenger Car
Knobs & Levers Included: Yes
Upper Tube Diameter (in): 2 in
Wire Plug: GM 3 7/8"
Lower Tube Diameter (in): 2 in
Shifter Location: Column Shift
Transmission: Auto
Installation Kits
Deluxe kits - Original Harness
For vehicles with an original factory harness, a 4-way flasher kit is included with these kits. This 4-way flasher kit will not only add safety to your vehicle, but will also convert your original wiring harness to the 3 7/8” plug found on your ididit column. These kits include all the necessary parts you will need to install the column to the gearbox. All you need to know is the diameter of the gearbox input shaft and the number of splines. Please note 1965-66 is Rear Steer (the gearbox is near the back of the engine) so a u-joint & intermediate shaft is not needed, therefore they are not included in the install kit.
1965-66
Part # 3003001002
Manual Gearbox: 3/4”-30
Includes Rag Joint & 4-way Flasher Kit
1965-66
Part # 3003002002
Manual Gearbox: 3/4”-36
Includes Rag Joint & 4-way Flasher Kit
1965-66
Part # 3003003002
Power Gearbox: 13-16”-36
Includes Rag Joint & 4-way Flasher Kit
Deluxe kits - Aftermarket Harness
These kits include all the necessary parts you will need to install the column to the gearbox. Many aftermarket wiring companies offer replacement harnesses that incorporate a 4-way flasher unit as well as the flat 3 7/8” plug therefore a 4-way flasher kit is not included in these kits. All you need to know before you order is the diameter of the gearbox input shaft and the number of splines. Please note 1965-67 is Rear Steer (the gearbox is near the back of the engine) so a u-joint & intermediate shaft is not needed, therefore they are not included in the install kit.
1965-66
Part # 3000053431
Manual Gearbox: 3/4”-30
Includes Rag Joint
1965-66
Part # 3000053434
Manual Gearbox: 3/4”-36
Includes Rag Joint
Details
- 1140660010/20/51 (II) DS
- 1140660010/20/51 (II) DS
- Ididit
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping (Lower 48)
Customer Reviews
Total Reviews (0)
You must login to post a review.
- Big Dog Auto Difference
- Huge SelectionWe carry 1000's of products for your classic car or truck!
- Old Fashioned Customer ServiceOur Customers are our #1 priority. We are committed to your satisfaction!
- We Are Classic Car Enthusiasts We have a deep love of the classics and over 40 years of experience!
- Super Low Prices & Free ShippingWe offer the lowest prices on the Web and we offer free shipping on orders over $75!
- Have a question? Ask the Pros
- Email UsGot a question? We've got the answer!
- Call Us800-686-1464
- ChatChat with Us
Write the First Review!