Home - Return to Previous Page
Additional Images

Ididit Retrofit 1967 Impala Tilt Column Shift Steering Column

1140780010/20/51 (II) DS
** Images above are for finish reference, actual product may var slightly**

This retrofit column is designed to fit your 1967 Impala and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount. Using an ididit installation kit, install your new steering column in place of the old. These columns come complete with a neutral safety switch (shift indicator not included). The 1967 columns will match the dash perfectly using the original bezel and a wiring adaptor is included. The shift pattern on the column allows you to use either a 3 or 4-speed automatic transmission (except early Powerglides, as they have a reverse pattern transmission). A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column. Add an aftermarket wheel (using an adaptor) or original wheel but keep in mind that an aftermarket wheel may push the wheel closer to the driver and the original wheel will increase the overall length of the column towards the driver.
Please Call for Availability



Neutral Safety Switch: Yes
Self-Canceling Turn Signals: Yes
4-Way Flashers: Yes
Straight or Tilt: 8-Position Tilt
Lower Shaft: 3/4" 36
Shifter Location: Column Shift
Collapsible No
Telescoping Head: No
Floor Mount Included: No
Gear Shift Indicator Included: No
Under Dash Mount Included: No
Horn: Yes
Upper Shaft: 69 to '94 GM Passenger Car
Knobs & Levers Included: Yes
Upper Tube Diameter (in): 2 in
Wire Plug: GM 3 7/8"
Lower Tube Diameter (in): 2 in
Transmission: Auto

Installation Kits

Deluxe Kits - Aftermarket Harness
These kits include all the necessary parts you will need to install the column to the gearbox. Many aftermarket wiring companies offer replacement harnesses that incorporate a 4-way flasher unit as well as the flat 3 7/8” plug therefore a 4-way flasher kit is not included in these kits. All you need to know before you order is the diameter of the gearbox input shaft and the number of splines. Please note 1967 is Rear Steer (the gearbox is near the back of the engine) so a u-joint & intermediate shaft is not needed, therefore they are not included in the install kit.

Part # 3000053431
Manual Gearbox: 3/4”-30
Includes Rag Joint

Part # 3000053440
Power Gearbox: 13/16”-36
Includes Rag Joint

Part # 3000053434
Manual Gearbox: 3/4”-36
Includes Rag Joint



Shipping Information

  • Item Requires Shipping
  • Free Shipping (Lower 48)

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.