Home - Return to Previous Page
Additional Images

Ididit Retrofit 1976-77 Ford Bronco Tilt Column Shift Steering Column

1130855010/20/51 (II) DS
** Images above are for finish reference, actual product may vary slightly**

This retrofit column is designed to fit your Bronco and does NOT require modification to your original vehicle to install. This Ford Style column features all Ford wiring and a Ford top shaft and will bolt to your stock box. Simply remove your old column, saving your original floor mount. For flawless installation, a pre-welded underdash mount comes standard with every column. Using an ididit installation kit, install your new steering column in place of the old. Add your stock Bronco wheel directly to the column and the gripping surface will be in the same location as the original. Available in tilt floor shift or tilt column shift versions. The shift pattern on the column shift column allows you to use either a 3 or 4-speed automatic transmission and utilizes the original transmission mounted neutral safety switch. A gear shift indicator is an option, but not included. A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column.
Please Call for Availability



Lower Shaft: 3/4" 36
Straight or Tilt: 8-Position Tilt
Neutral Safety Switch: No
4-Way Flashers: Yes
Self-Canceling Turn Signals: Yes
Upper Tube Diameter (in): 2.25 in
Upper Shaft: Year specific Ford Top Shaft
Shifter Location: Column Shift
Telescoping Head; No
Wire Plug: Ford Style
Horn: Yes
Gear Shift Indicator Included: No
Floor Mount Included: No
Knobs & Levers Included: Yes
Under Dash Mount Included: Yes
Collapsible: No
Lower Tube Diameter (in): 2.25 in
Transmission: Auto

Installation Kits

1974-77 3000383400
Includes 3/4"-36 Half Rag Joint
A new half rag joint is required for installation. The original rag joint was pressed onto the original column and cannot be removed.

1974-77 3000941000
Includes replacement rubber disk for Rag Joint
Before installing, carefully inspect the rubber on the other half of the original rag joint to be sure it is all intact. If it is not, you will need to use this replacement.

1978-79 3000053434
Includes 3/4"-36 x 3/4"-36 Rag Joint



Shipping Information

  • Item Requires Shipping
  • Free Shipping (Lower 48)

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.